My runs w/ the slicks (Video clip)

2kscmax · 10-17-2009, 11:33 PM

Hi Guys: Just want to update you, did couple of runs @ Lapeer Dragway, and the last two runs my Stage III clutch started slipping

. It's time to get the ACT sprung 6 puck (Ordered this week). I'm sure I will get into the 12s,any way here is my Video clip, and the slips:

http://videos.streetfire.net/video/2K-supercharged-Maxima-Vs_712343.ht

My 1st Run

My run w/ the CTS V

My Run w/ the Muscle Car: lol my son felt the Maxima is standing still. this is when the Clutch started slipping

My last run w/ the Mustang Mach1, Clutch slipping top 3rd, and 4th

Ronin Quickblade · 10-18-2009, 01:34 PM

1.51 60' in a CTSV? Good lord that car is movin from the dig!

W3rd · 10-18-2009, 02:18 PM

Quote:

Originally Posted by Ronin Quickblade

1.51 60' in a CTSV? Good lord that car is movin from the dig!

and it didn't break anything doing it. I know the first gen's like to wheel hop.

Stang04GT · 10-18-2009, 08:51 PM

Quote:

Originally Posted by Ronin Quickblade

1.51 60' in a CTSV? Good lord that car is movin from the dig!

It looks like that was the muscle car that had the 1.51 60'

The CTSV had 2.1 60

Ronin Quickblade · 10-18-2009, 09:32 PM

Quote:

Originally Posted by Stang04GT

It looks like that was the muscle car that had the 1.51 60'

The CTSV had 2.1 60

Look at the slip. The "Muscle Car" was a Mach, and his was the Max. Above that picture was the CTS-V/etc. I think I was right

2kscmax · 10-18-2009, 10:00 PM

Quote:

Originally Posted by Ronin Quickblade

Look at the slip. The "Muscle Car" was a Mach, and his was the Max. Above that picture was the CTS-V/etc. I think I was right

The 2nd slip from the top is the CTS V & The Maxima.
CTS V 60' was 2.1, 13.78 ET, Maxima 60' 1.91, 13.28 ET. The Muscle car did the 1.51 60'( 3rd slip from the top)

2kscmax · 10-18-2009, 10:01 PM

Quote:

Originally Posted by Stang04GT

It looks like that was the muscle car that had the 1.51 60'

The CTSV had 2.1 60

Your wright.

2kscmax · 10-18-2009, 10:03 PM

Quote:

Originally Posted by W3rd

and it didn't break anything doing it. I know the first gen's like to wheel hop.

It was the Muscle Car w/ 1.51 60', not the CTS V, check the 2nd slip from the Top.

Ronin Quickblade · 10-18-2009, 11:14 PM

I stand corrected. the way you had the colon was like Below, is this slip. I apologize

2kscmax · 10-18-2009, 11:32 PM

Quote:

Originally Posted by Ronin Quickblade

I stand corrected. the way you had the colon was like Below, is this slip. I apologize

No problem man.

Boostedf22 · 10-19-2009, 01:45 AM

Nice runs

2kscmax · 10-20-2009, 06:55 PM

Quote:

Originally Posted by Boostedf22

Nice runs

Thanks man

peelerboy · 10-20-2009, 09:29 PM

Nice runnin' Maxima!!

2kscmax · 10-23-2009, 02:12 PM

Quote:

Originally Posted by peelerboy

Nice runnin' Maxima!!

Thanks man

2kscmax · 11-11-2009, 12:16 AM

OK guys last Saturday I pulled the trans of the car, installed the new ACT 6 puck sprung disk , and I want you to see the pictures i took to the old disk.

v8killaz · 11-11-2009, 12:33 AM

damn must have fucked up the flywheel also

2kscmax · 11-11-2009, 11:16 AM

Quote:

Originally Posted by v8killaz

damn must have fucked up the flywheel also

No the flywheel is ok

10-17-2009, 11:33 PM	#1
2kscmax Junior Member Join Date: Jul 2008 Location: Oakland County, MI Rep Power: 2 Feedback: (0)	My runs w/ the slicks (Video clip) Hi Guys: Just want to update you, did couple of runs @ Lapeer Dragway, and the last two runs my Stage III clutch started slipping. It's time to get the ACT sprung 6 puck (Ordered this week). I'm sure I will get into the 12s,any way here is my Video clip, and the slips: http://videos.streetfire.net/video/2K-supercharged-Maxima-Vs_712343.ht My 1st Run My run w/ the CTS V My Run w/ the Muscle Car: lol my son felt the Maxima is standing still. *this is when the Clutch started slipping* My last run w/ the Mustang Mach1, Clutch slipping top 3rd, and 4th __________________ *Vortech V2 T-trim, 2.87" pulley, intercooled, Defi Gauges, RC 550cc, Walbro 255lph, Aeromotive AFPR, Cattman Headers and 3"catback Last edited by 2kscmax; 11-11-2009 at 12:23 AM.*

10-19-2009, 01:45 AM	#11
Boostedf22 Junior Member Join Date: Jul 2008 Location: Under The Hood Rep Power: 2 Feedback: (5)	Nice runs __________________ Xceedspeeds # 1 Kool Guy. Can you spare some Rep my kids need to eat.

10-20-2009, 09:29 PM	#13
peelerboy cheezburgers ftw Join Date: May 2005 Location: Royal Joke Rep Power: 17 Feedback: (0)	Nice runnin' Maxima!! __________________ -Dale Want some original artwork done of your car? Go here: http://dsalni.wordpress.com/

11-11-2009, 12:16 AM	#15
2kscmax Junior Member Join Date: Jul 2008 Location: Oakland County, MI Rep Power: 2 Feedback: (0)	OK guys last Saturday I pulled the trans of the car, installed the new ACT 6 puck sprung disk , and I want you to see the pictures i took to the old disk. __________________ *Vortech V2 T-trim, 2.87" pulley, intercooled, Defi Gauges, RC 550cc, Walbro 255lph, Aeromotive AFPR, Cattman Headers and 3"catback Last edited by 2kscmax; 11-11-2009 at 12:26 AM.*

11-11-2009, 12:33 AM	#16
v8killaz Premium Member Join Date: Jul 2008 Location: Garage Rep Power: 18 Feedback: (21)	damn must have fucked up the flywheel also __________________ I feed the road donuts If a cop is in front ill pass him going 75 if hes doing 70, then once im ahead a bit i'll go a bit faster then faster until i hit mach 1