FS: 1999/Chevy/Camaro

99SilverZ · 04-22-2009, 11:47 AM

Year/Make/Model: 1999/Chevy/Camaro

Location: Downriver

Price: 12,000

Mileage: n/a
-------------

Possibly may have it sold locally but throwing it on here to see the interest.

Price $12,000

1999 Z28
1SC Car with T-Tops (Manual windows/locks, no cruise)
3300LBS
85k on the body

Livernois 404ci built to handle 1000HP. Around 2k miles on this and everything else.

Callies Crank
Manley Rods
Mahle Pistons
ARP studs/bolts

LS6 Oil Pump

Powerbond Underdrive Pulley

Livernois Stage 3 "R" Heads with stainless valves (2.10 int) milled .030"

Cometic Head Gaskets

ARP Head Studs

F.A.S.T 90 Intake (Sanded and painted Silver)

Nick Williams 90MM Polish Throttle Body

LS7 Lifters

Trend Hardened Pushrods

Veneagence Racing VRX7 Cam (244/24

LS2 Timing Chain

Energy Suspension Poly Motor Mounts

Tuned by Wheel 2 Wheel Powertrain

68# Injectors

Valve cover PCV system was cut, welded, sanded and painted. Running K&N Breathers.

Kooks 1 7/8" Stainless Headers

Kooks 3" Stainless Y-Pipe

Magnaflow 3" Bullet dumped before the axle

Walbro 255 in tank pump from Nasty Performance with hotwire kit

UMI Adjustable Tunnel Mounted Torque Arm

BMR Subframe Connections

UMI Lower Control Arms

UMI Lower Control Arm relocation brackets

Speed inc Chromoly Drive Shaft

3.73 Rear end gear with new install kit/bearing

Comp Engineering Drag Shocks

Performabuilt Level 2 4L60E Transmission- good too 700rwhp. Info here http://www.performabuilt.com/GMCars022008.html

Yank SS3600 Converter

Derale Trans Cooler

Powerslot Slotted Rotors

Hawk HPS Pads

Gloss black/cleared Calipers

Optima Red Top Battery

Dynotune Digital Nitrous Pressure Gauge

Nitrous Outlet Ashtray Switch Panel

Ozite Lightweight Carpet ( 7lbs total for the whole car)

Powermaster Hi TQ Mini Starte

Corvette 02 Sensors with extended Harness

17" C6 OE Concepts Vette Wheels 275/40/17

Hockey Stripes by Upper Level Graphics

OEM LT1 SS Spoiler (paint matches perfect, they painted it when painting the car and lines up like OEM)

Repainted fall 08' by Bill Wink Chevrolet due to someone keying the left side of the car. Warrantied for life.

New dash/column fall '08 from someone trying to steal the car (Right before the keying). Did not affect title. Work performed by Bill Wink Chevrolet, warrantied for life.

The car went a best of 11.1 @ 127MPH at Milan Dragway last year with a 1.9 60'. I had 26x10.5 slicks and it still spun, even spun the slicks on the wheel. With some 15x10's and a 28" tall tire I see a 10.80 or better with a decent 60'. With a 150-200 shot I could see the car touching a high 9.

It is a Nitrous motor designed to still run "efficient" on motor I guess you could say. I'm not a fan of cars that need a 400 shot to move out.. Rings are gapped for spray. The car made 480rwhp on a Mustang Dyno. I did have a 125 shot on the car last year. This was with a Harris Speed Works dual nozzle brute force kit using their stand alone fuel system. It was an absolute monster with the spray on it, the VRX7 cam loves it. Didn't get any track numbers with it. Got kicked for no cage from Milan before I could spray it.

I will try and be totally honest about anything on the car. It is loud. Probably not something you want to DD unless you really like the noise. More of a weekend warrior/nice day kind of car. With the poly motor mounts and loud exhaust, there are rattles in the interior as to be expected. The car has been ran at the track and raced. I find it VERY funny when someone sells a sports car and says "never raced", my ass. Again, I've had nothing break or give me an issue since I built the car.

I would give the outside/body of the car 8/10. The paint looks great, Bill Wink did a nice job on it. Under the right side there was a jack stand that slipped last year and hit the floor. Left a dent in the floor. Again, this is under the car where you cannot see it. I haven't had the time to get it fixed. The overall body is straight and true, no accidents, clean carfax. On the driver door panel (inside the car door panel)near the top there is a small sun spot on the door panel. Nothing huge. The interior of the car is very clean. Dash is brand new from the dealer from the incident last year. I haven't had to do a since maintence related thing since I built this shortblock. The only thing I did was change the oil, check the plugs and put gas in it. Has been very reliable. Last year and this year I had a few minor problems with the trans. The car was wanting to lock its self in 3rd gear from a dead stop when it was brought up on the converter. This was due to the P757 (I think?) and another code. I recently had Dan Millen @ Livernois Motorsports tune those out and it hasnt flinched since then. Runs flawlessly. The back seats are out of the car since I put the new carpet in, I will throw them back in for the sale.

Overall it would cost you more than double what im asking to replicate the car. I've always taken very good care of it and anyone that has seen it around can vouch for the car. I will not take $11,500. I am VERY firm on $12,000. If you are looking for a car to haggle thousands off of this is NOT the car for you. I am pricing it low for a quick sale. I have my eyes on another car. $12,000 for a turn key 10 second car with the parts into it I have is a damn good deal in my opinion. I have well over $15,000 into it not counting the car its self. The car is pretty well known around here and anyone on here that has seen it go will tell you it moves out pretty "decent".

One last thing, don't show up and expect to drive the car without CASH in hand. Checks/visa do not work. I don't care if you show up in a $100,000.00 Mercedes your still not driving it without cash in hand. I will be more than happy to take you for a ride to show you the drivability, ride and power. The amount of power the car makes under the curve @ 3-4k rpm is stupid and from a first gear roll the converter flash is violent. I'm not having someone wrap the car around a pole.

I'm located in Downriver, MI. (20 mins outside of Detroit).

When it was painted at Bill Wink.

Random of stripe

Assembling

After first start up getting gas in the fantastic Michigan weather.

Painted fast Intake

Intake/Kooks Stainless headers. There is a Speed Inc K&N Breather where the oil fill cap is now

Before laying ozite and cleaning. Found about $10 in change.

Laying the Ozite

Back seat portion. Finished product wasn't nearly as good as the front. The back hump is ridiculously hard to "seam". I work in customer service, not carpentry.

Passenger side

Painted Deck lid

Rotors on the car

Finishing up install. Car looks identical minus the centers stripes. Took them off when it was painted.

I will get better ones with the new paint and SS spoiler tomorrow. It has been raining the past 9999999999 days, but it will be nice this weekend.

Thanks for looking. Shoot me a PM if interested.

EDIT- Heres a recent video from a few weeks ago. My car starts at 4:45 in the video. The front wheels in the picture are a buddys stock 16" snow flakes.

http://videos.streetfire.net/video/D...ion_642482.htm
You can see the new spoiler in the 3rd race. The roll races were from a 40 roll...doesn't move out bad for a auto in second with 3.73s

All of those races are on motor. Took the Nitrous kit off last year.

99SilverZ · 04-22-2009, 09:28 PM

Updated

NA_95 · 04-22-2009, 09:33 PM

Dude sick car i love it. If i had $$ I'd be all over this.

GTfons226 · 04-22-2009, 09:40 PM

Free bump for a clean car thats fast as hell. Seen it in action a few times.

evoixmivec · 04-22-2009, 09:43 PM

why are you selling it?

bump for you

99SilverZ · 04-22-2009, 09:53 PM

Quote:

Originally Posted by evoixmivec

why are you selling it?

bump for you

Got eyes on a new car. Already got approved for the loan from the credit union but I need to sell mine first. I can't afford both.

Thank you guy's for the comments I really appreciate it. Spread the word, if anyone can sell it I will send a few hundred your way for helping me out.

Chad

evoixmivec · 04-22-2009, 10:03 PM

Quote:

Originally Posted by 99SilverZ

Got eyes on a new car. Already got approved for the loan from the credit union but I need to sell mine first. I can't afford both.

Thank you guy's for the comments I really appreciate it. Spread the word, if anyone can sell it I will send a few hundred your way for helping me out.

Chad

lol what are you getting if you don't mind me asking?

fuzzynuts · 04-22-2009, 10:52 PM

sounds pretty fricken wild in that video.. seems like a sweet price for the work invested in this beast.

DoubleAction · 04-23-2009, 05:59 AM

wow bump for a sick camaro! wish i could afford this

FSTSUHC · 04-23-2009, 12:25 PM

Bump for a bad-ass car. Awesome seller too.

We need to race before this thing goes buh-bye. I need to show you my taillights.

99SilverZ · 04-23-2009, 03:17 PM

Quote:

Originally Posted by FSTSUHC

Bump for a bad-ass car. Awesome seller too.

We need to race before this thing goes buh-bye. I need to show you my taillights.

May have it out this weekend, may not. Have had tons of interest but no one bit the bullet yet.

Again thank you for the comments.

Chad

99SilverZ · 04-23-2009, 09:43 PM

More pics..

Pictures from this afternoon.

PLEASE DISREGAURD THE WHEELS ON THE CAR. THOSE ARE THE "GO FAST" wheels

. The car will be sold with the following 17" C6's.

Here is the sun spot on the door panel I described.

New column/dash

99SilverZ · 04-23-2009, 09:44 PM

I do have the kick panel for driver side, was cleaning up some wiring.

OEM LT1 SS Spoiler fit... good

evoixmivec · 04-23-2009, 10:10 PM

what the fuck i lost to an automatic

abazaba410 · 04-23-2009, 10:42 PM

damn nice. what power did this put down?

Turbo24 · 04-23-2009, 10:46 PM

Quote:

Originally Posted by evoixmivec

what the fuck i lost to an automatic

i bet alot of people lose to this automatic beauty......

FSTSUHC · 04-24-2009, 08:29 AM

Quote:

Originally Posted by evoixmivec

what the fuck i lost to an automatic

All that I have to say is wow. Make fast car's are auto's. Jesus. Bump for Chad,

This thing going to be out tonight?

jay_404ga · 04-24-2009, 09:44 AM

im a honda guy but i gotta admit this is a sick ride

99SilverZ · 04-24-2009, 10:10 AM

Quote:

Originally Posted by abazaba410

damn nice. what power did this put down?

480rwhp on a Mustang dyno through an unlocked converter.

Yeah I'll be out tonight Joe. Want to meet up? It's going to be really nice. Maybe after I paddle someones ass they will buy it!!

Thanks for the comments!

slowsti · 04-24-2009, 10:28 AM

i tryed chad. sorry. like u said if there is a will theres a way.

04-22-2009, 11:47 AM	#1
99SilverZ Banned Join Date: Jul 2007 Location: Downriver Rep Power: 0 Feedback: (0)	FS: 1999/Chevy/Camaro Year/Make/Model: 1999/Chevy/Camaro Location: Downriver Price: 12,000 Mileage: n/a ------------- Possibly may have it sold locally but throwing it on here to see the interest. Price $12,000 1999 Z28 1SC Car with T-Tops (Manual windows/locks, no cruise) 3300LBS 85k on the body Livernois 404ci built to handle 1000HP. Around 2k miles on this and everything else. Callies Crank Manley Rods Mahle Pistons ARP studs/bolts LS6 Oil Pump Powerbond Underdrive Pulley Livernois Stage 3 "R" Heads with stainless valves (2.10 int) milled .030" Cometic Head Gaskets ARP Head Studs F.A.S.T 90 Intake (Sanded and painted Silver) Nick Williams 90MM Polish Throttle Body LS7 Lifters Trend Hardened Pushrods Veneagence Racing VRX7 Cam (244/24 LS2 Timing Chain Energy Suspension Poly Motor Mounts Tuned by Wheel 2 Wheel Powertrain 68# Injectors Valve cover PCV system was cut, welded, sanded and painted. Running K&N Breathers. Kooks 1 7/8" Stainless Headers Kooks 3" Stainless Y-Pipe Magnaflow 3" Bullet dumped before the axle Walbro 255 in tank pump from Nasty Performance with hotwire kit UMI Adjustable Tunnel Mounted Torque Arm BMR Subframe Connections UMI Lower Control Arms UMI Lower Control Arm relocation brackets Speed inc Chromoly Drive Shaft 3.73 Rear end gear with new install kit/bearing Comp Engineering Drag Shocks Performabuilt Level 2 4L60E Transmission- good too 700rwhp. Info here http://www.performabuilt.com/GMCars022008.html Yank SS3600 Converter Derale Trans Cooler Powerslot Slotted Rotors Hawk HPS Pads Gloss black/cleared Calipers Optima Red Top Battery Dynotune Digital Nitrous Pressure Gauge Nitrous Outlet Ashtray Switch Panel Ozite Lightweight Carpet ( 7lbs total for the whole car) Powermaster Hi TQ Mini Starte Corvette 02 Sensors with extended Harness 17" C6 OE Concepts Vette Wheels 275/40/17 Hockey Stripes by Upper Level Graphics OEM LT1 SS Spoiler (paint matches perfect, they painted it when painting the car and lines up like OEM) Repainted fall 08' by Bill Wink Chevrolet due to someone keying the left side of the car. Warrantied for life. New dash/column fall '08 from someone trying to steal the car (Right before the keying). Did not affect title. Work performed by Bill Wink Chevrolet, warrantied for life. The car went a best of 11.1 @ 127MPH at Milan Dragway last year with a 1.9 60'. I had 26x10.5 slicks and it still spun, even spun the slicks on the wheel. With some 15x10's and a 28" tall tire I see a 10.80 or better with a decent 60'. With a 150-200 shot I could see the car touching a high 9. It is a Nitrous motor designed to still run "efficient" on motor I guess you could say. I'm not a fan of cars that need a 400 shot to move out.. Rings are gapped for spray. The car made 480rwhp on a Mustang Dyno. I did have a 125 shot on the car last year. This was with a Harris Speed Works dual nozzle brute force kit using their stand alone fuel system. It was an absolute monster with the spray on it, the VRX7 cam loves it. Didn't get any track numbers with it. Got kicked for no cage from Milan before I could spray it. I will try and be totally honest about anything on the car. It is loud. Probably not something you want to DD unless you really like the noise. More of a weekend warrior/nice day kind of car. With the poly motor mounts and loud exhaust, there are rattles in the interior as to be expected. The car has been ran at the track and raced. I find it VERY funny when someone sells a sports car and says "never raced", my ass. Again, I've had nothing break or give me an issue since I built the car. I would give the outside/body of the car 8/10. The paint looks great, Bill Wink did a nice job on it. Under the right side there was a jack stand that slipped last year and hit the floor. Left a dent in the floor. Again, this is under the car where you cannot see it. I haven't had the time to get it fixed. The overall body is straight and true, no accidents, clean carfax. On the driver door panel (inside the car door panel)near the top there is a small sun spot on the door panel. Nothing huge. The interior of the car is very clean. Dash is brand new from the dealer from the incident last year. I haven't had to do a since maintence related thing since I built this shortblock. The only thing I did was change the oil, check the plugs and put gas in it. Has been very reliable. Last year and this year I had a few minor problems with the trans. The car was wanting to lock its self in 3rd gear from a dead stop when it was brought up on the converter. This was due to the P757 (I think?) and another code. I recently had Dan Millen @ Livernois Motorsports tune those out and it hasnt flinched since then. Runs flawlessly. The back seats are out of the car since I put the new carpet in, I will throw them back in for the sale. Overall it would cost you more than double what im asking to replicate the car. I've always taken very good care of it and anyone that has seen it around can vouch for the car. I will not take $11,500. I am VERY firm on $12,000. If you are looking for a car to haggle thousands off of this is NOT the car for you. I am pricing it low for a quick sale. I have my eyes on another car. $12,000 for a turn key 10 second car with the parts into it I have is a damn good deal in my opinion. I have well over $15,000 into it not counting the car its self. The car is pretty well known around here and anyone on here that has seen it go will tell you it moves out pretty "decent". One last thing, don't show up and expect to drive the car without CASH in hand. Checks/visa do not work. I don't care if you show up in a $100,000.00 Mercedes your still not driving it without cash in hand. I will be more than happy to take you for a ride to show you the drivability, ride and power. The amount of power the car makes under the curve @ 3-4k rpm is stupid and from a first gear roll the converter flash is violent. I'm not having someone wrap the car around a pole. I'm located in Downriver, MI. (20 mins outside of Detroit). When it was painted at Bill Wink. Random of stripe Assembling After first start up getting gas in the fantastic Michigan weather. Painted fast Intake Intake/Kooks Stainless headers. There is a Speed Inc K&N Breather where the oil fill cap is now Before laying ozite and cleaning. Found about $10 in change. Laying the Ozite Back seat portion. Finished product wasn't nearly as good as the front. The back hump is ridiculously hard to "seam". I work in customer service, not carpentry. Passenger side Painted Deck lid Rotors on the car Finishing up install. Car looks identical minus the centers stripes. Took them off when it was painted. I will get better ones with the new paint and SS spoiler tomorrow. It has been raining the past 9999999999 days, but it will be nice this weekend. Thanks for looking. Shoot me a PM if interested. EDIT- Heres a recent video from a few weeks ago. My car starts at 4:45 in the video. The front wheels in the picture are a buddys stock 16" snow flakes. http://videos.streetfire.net/video/D...ion_642482.htm You can see the new spoiler in the 3rd race. The roll races were from a 40 roll...doesn't move out bad for a auto in second with 3.73s All of those races are on motor. Took the Nitrous kit off last year. Last edited by 99SilverZ; 04-22-2009 at 11:16 PM.

04-22-2009, 09:33 PM	#3
NA_95 Senior Member Join Date: Apr 2007 Location: Antarctica Rep Power: 5 Feedback: (12)	Dude sick car i love it. If i had $$ I'd be all over this. __________________ CLEAN 1985 Honda CRX SHELL! 1700LBS! For sale My stuff isn't expensive, you just don't have money. http://www.xceedspeed.com/forums/sho...d.php?t=149333

04-22-2009, 09:43 PM	#5
evoixmivec Senior Member Join Date: Apr 2007 Location: earth Rep Power: 7 Feedback: (1)	why are you selling it? bump for you __________________ 06 evo- sold 09 pathfinder- DD

04-23-2009, 05:59 AM	#9
DoubleAction Member Join Date: Jun 2008 Location: Macomb Rep Power: 3 Feedback: (1)	wow bump for a sick camaro! wish i could afford this __________________ Street & Racing Technology

04-23-2009, 12:25 PM	#10
FSTSUHC Distinguished Member Join Date: Aug 2005 Location: Getting Banned by Motorhead. Rep Power: 22 Feedback: (6)	Bump for a bad-ass car. Awesome seller too. We need to race before this thing goes buh-bye. I need to show you my taillights. __________________ Joe- ATM Squad www.DANASE.com www.AGGRESSIVEAUTO.com

04-22-2009, 09:28 PM	#2
99SilverZ Banned Join Date: Jul 2007 Location: Downriver Rep Power: 0 Feedback: (0)	Updated

04-22-2009, 09:40 PM	#4
GTfons226 Newb Join Date: Jun 2007 Location: .............. Rep Power: 3 Feedback: (0)	Free bump for a clean car thats fast as hell. Seen it in action a few times.

04-22-2009, 10:52 PM	#8
fuzzynuts Newb Join Date: Sep 2008 Location: a cold place Rep Power: 2 Feedback: (0)	sounds pretty fricken wild in that video.. seems like a sweet price for the work invested in this beast.

04-23-2009, 09:43 PM	#12
99SilverZ Banned Join Date: Jul 2007 Location: Downriver Rep Power: 0 Feedback: (0)	More pics.. Pictures from this afternoon. PLEASE DISREGAURD THE WHEELS ON THE CAR. THOSE ARE THE "GO FAST" wheels . The car will be sold with the following 17" C6's. Here is the sun spot on the door panel I described. New column/dash

04-23-2009, 09:44 PM	#13
99SilverZ Banned Join Date: Jul 2007 Location: Downriver Rep Power: 0 Feedback: (0)	I do have the kick panel for driver side, was cleaning up some wiring. OEM LT1 SS Spoiler fit... good

04-23-2009, 10:10 PM	#14
evoixmivec Senior Member Join Date: Apr 2007 Location: earth Rep Power: 7 Feedback: (1)	what the fuck i lost to an automatic __________________ 06 evo- sold 09 pathfinder- DD

04-23-2009, 10:42 PM	#15
abazaba410 Senior Member Join Date: Sep 2005 Location: South Lyon Rep Power: 13 Feedback: (6)	damn nice. what power did this put down? __________________ Had Me? U never had ur car..... I Live My Life a Quarter Mile at a Time I Like Fast Cars and Hott Women In That Order

04-24-2009, 09:44 AM	#18
jay_404ga Newb Join Date: Dec 2007 Location: Holland, Michigan Rep Power: 0 Feedback: (0)	im a honda guy but i gotta admit this is a sick ride

04-24-2009, 10:28 AM	#20
slowsti Newb Join Date: Jun 2008 Location: down the river Rep Power: 2 Feedback: (0)	i tryed chad. sorry. like u said if there is a will theres a way. __________________ no more sti.looking for a new ride.