![]() |
|
|
#101 |
|
Senior Member
|
Spoken by someone who has obviously never done it in a fast car and especially a fast car on small tires and stock-style suspension.
__________________
Laydown Racing '00 z28 Street Cruiser 355 SBC w/ 23 deg. heads, radials, and stock-suspension Taking out the garbage...one turd Lambo at a time. |
|
|
|
|
|
#102 |
|
Fabricator
|
umm... have you read this whole thread? have you looked at my sig? and why the hell would you have a really fast car on small tires and stock suspension anyway? go away dude.
__________________
![]() - Miller Syncrowave TIG Welder - - Bridgeport CNC Milling Machine - I'm a fabricator, check it out --->Here! - Polyurethane Motor Mounts! - - DSM Turbo Manifold! - - www.Revshift.com - |
|
|
|
|
|
#103 | |
|
Senior Member
|
Quote:
Here a nice easy pass...all I had to do was hit the gas and then I actually fell asleep: http://videos.streetfire.net/video/T...omas_62195.htm I've seen your sig. I don't see any fast cars on the list just a dyno number which tells me you've never even made a pass with it. 800 hp is nice. I made that on my lowest boost setting......at 5000 rpms... Back to how you don't have a clue as to what you're talking about now...
__________________
Laydown Racing '00 z28 Street Cruiser 355 SBC w/ 23 deg. heads, radials, and stock-suspension Taking out the garbage...one turd Lambo at a time. |
|
|
|
|
|
|
#104 | |
|
Fabricator
|
Quote:
__________________
![]() - Miller Syncrowave TIG Welder - - Bridgeport CNC Milling Machine - I'm a fabricator, check it out --->Here! - Polyurethane Motor Mounts! - - DSM Turbo Manifold! - - www.Revshift.com - |
|
|
|
|
|
|
#105 |
|
Senior Member
|
I simply pointed out the fact that it was obvious you had never done it based on what you thought it took to do it. You were the one that got bent out of shape and now have to insert your foot into your mouth. I'm a nobody but I've been faster than you and I know exactly how hard it is to get a car down the track.
__________________
Laydown Racing '00 z28 Street Cruiser 355 SBC w/ 23 deg. heads, radials, and stock-suspension Taking out the garbage...one turd Lambo at a time. |
|
|
|
|
|
#106 | |
|
Fabricator
|
Quote:
read the thread before you assume things. people like you are what makes america retarded. i did it in one pass, a$$hole.
__________________
![]() - Miller Syncrowave TIG Welder - - Bridgeport CNC Milling Machine - I'm a fabricator, check it out --->Here! - Polyurethane Motor Mounts! - - DSM Turbo Manifold! - - www.Revshift.com - |
|
|
|
|
|
|
#107 | |
|
Senior Member
|
Quote:
__________________
Laydown Racing '00 z28 Street Cruiser 355 SBC w/ 23 deg. heads, radials, and stock-suspension Taking out the garbage...one turd Lambo at a time. |
|
|
|
|
|
|
#108 | ||
|
Senior Member
|
Quote:
__________________
Motown Motown Aviators On Quote:
|
||
|
|
|
|
|
#109 |
|
Senior Member
|
10 PM is when we're meeting to celebrate my stupidity Eric. I PM'd you location.
__________________
Laydown Racing '00 z28 Street Cruiser 355 SBC w/ 23 deg. heads, radials, and stock-suspension Taking out the garbage...one turd Lambo at a time. |
|
|
|
|
|
#110 |
|
Member
|
i second ltlhomer.half the ppl dont know the skill and practice it takes to drive a real race car even if its only a straight line..especially small tire cars like we have.ltlhomer is your offer on that race still good?i should be driving soon,were going tomorrow to test the turbo car with a 29.5/10.5w we'll see how it works out.
__________________
xx.10@122.bfg all seasons. |
|
|
|
|
|
#111 | |
|
Senior Member
|
Quote:
The only piece I'm missing is the trans and I'm supposed to pick that up tomorrow at noon. Might be testing within a week.
__________________
Laydown Racing '00 z28 Street Cruiser 355 SBC w/ 23 deg. heads, radials, and stock-suspension Taking out the garbage...one turd Lambo at a time. |
|
|
|
|
|
|
#112 |
|
Senior Member
|
i only nut swing off of a couple porsches and ferraris, im not a big lambo fan although i wouldnt turn one down!
__________________
JUST SAY NO! to destroying a perfectly good economy car |
|
|
|
|
|
#114 | |
|
Junior Member
|
Quote:
if so that must have been a challenge to get it to only go 10.7's. mine only makes 500 at the tire and is much quicker
__________________
11.50@165 |
|
|
|
|
|
|
#115 |
|
Newb
|
|
|
|
|
|
|
#116 |
|
Member
|
He said he only made "one" pass and that was probably on 91 not "race fuel" and you have no idea what the boost was set at. Lastly I highly doubt your car weighs 4000lbs, if anything close to that.
|
|
|
|
|
|
#117 |
|
Fabricator
|
i was only putting down around 650rwhp on 20psi with 93 octane during that run and there was quite a bit of wheel spin. if i were able to run again the time would have come down alot.
__________________
![]() - Miller Syncrowave TIG Welder - - Bridgeport CNC Milling Machine - I'm a fabricator, check it out --->Here! - Polyurethane Motor Mounts! - - DSM Turbo Manifold! - - www.Revshift.com - |
|
|
|
|
|
#119 | |
|
Senior Member
|
Quote:
__________________
Laydown Racing '00 z28 Street Cruiser 355 SBC w/ 23 deg. heads, radials, and stock-suspension Taking out the garbage...one turd Lambo at a time. |
|
|
|
|
|
|
#120 | |
|
Fabricator
|
Quote:
__________________
![]() - Miller Syncrowave TIG Welder - - Bridgeport CNC Milling Machine - I'm a fabricator, check it out --->Here! - Polyurethane Motor Mounts! - - DSM Turbo Manifold! - - www.Revshift.com - |
|
|
|
|
![]() |
|
||||||
| Thread Tools | |
|
|